Translate

Showing posts with label free-motion. Show all posts
Showing posts with label free-motion. Show all posts

Friday, March 14, 2014

The Order of Stitching

After all the pieces are fused into position, I work on the embroidery and applique next.  First I begin the with layer that appears to be on the bottom.  So I'll begin with the edges of the blue ginkgo leaf first.  Why?  Because I'm lazy, and don't like to spend lots of time back tacking and pulling threads to the back and tying them! If I do the bottom layer first, then another layer of stitching will eventually cross the ends, and hold them in place.  When I get to the top layer, then I'll have to do a minimum of stitching in place or pulling threads to the back.

Choose your thread carefully. I always use shiny polyester embroidery threads usually variegated ones. Remember that my name is Ann Variegated Fahl.  I love color change.  Unreel an arm's length of thread and let it puddle on the fabric.  Do you like it? If you aren't sure, do a little test stitching first on a scrap to avoid having to tear out lots of embroidery.

Note*  The photos below were taken after the quilt was finished.  However the the embroidery and applique were actually stitched only on the quilt top.

Closeup of Ginkgo Leaf, Florentine Edge Applique
The Florentine Edge Applique is a technique I have created using a free-motion zigzag stitch and a hoop. It gives a versatile wide edge treatment that I just love.  I have written a booklet on the subject of Applique, which gives complete instructions on this technique.  Or you may also refer to a 2013 article that I wrote in the American Quilter magazine fall issue.

Also in a hoop I stitch the veins in the lily pads. I've used a blue variegated thread for this.
Next, while I still had my embroidery hoop close by, I covered the cattails, ducks heads and bills with straight free motion embroidery. Then I basted the layers together, and will finish the rest of the details in the quilting phase of the quilt. Before I do more decorative quilting, I outline every shape in the center of the quilt with mono filament thread.

Here is Ethel. I've quilted her with a brown variegated thread. She has so many different fabrics, one thread choice acts as a unifying device. I've tried to quilt near the edge of almost every feather.
I had to use two different threads to quilt Norman.
I used a shiny white thread on the wings and slender white detail on his neck. Then I used the same variegated brown that I used on Ethel's wings.

Quilting in the pond.
I chose a light blue variegated thread to quilt the pond.  It is the same thread used for the Florentine edge applique. I love adding a little spiral here and there.  Once the middle is completely quilted then I stitch around the inner edge of the border and then quilt the edge.
Detail of the top edge of quilt
I used lots of curls and coils in the green background, using a blue variegated thread.  Then on the edge I stitched using a dark variegated combination thread on the border. 

I blocked the quilt, trimmed the edges and bound the edges.  You can see the finished quilt on my website.  On Ginkgo Pond.

Next time I'll talk about another ginkgo quilt.

Ann Fahl





Friday, March 29, 2013

Needle UP? Needle DOWN?

That is the question.  Having a needle up/down option on your sewing machine makes the job of sewing so much easier.   Once you have the needle up/down option, you can never have a machine without it!
This is the needle up/down on my machine.

When I'm quilting on a piece, if I stop the machine to rest for a moment, the fabric or project can't shift on me if it is set for needle down. Then when I start sewing again, I carefully begin stitching slowly, working up gradually to my regular speed.  If well done, the starts and stops shouldn't show!

When quilting, I like to set the machine for needle down.
When doing free-motion embroidery, I guess it really doesn't matter whether the needle stops in the up or the down position. The starts and stops aren't as visible.

Piecing, is nice when the needle stays up. After each seam is finished, the needle is up and the pieces may be easily removed from the needle area and threads clipped. When I attach bias binding, I like the needle down.

If the project is applique I usually choose to have needle down. If I have to pivot at corners, or have smooth curves, it's nice to have it set down.
Especially when pivoting is necessary at corners, I like the needle to stop down

If you are sewing on a new machine, take the time to notice which way your prefer to set your machine for different tasks.  Then when you begin sewing for the day, set your needle position accordingly.

Caution:  I'd like to leave you with one caution on this subject. Never leave the needle in the fabric or project for long periods of time.  If you are finished sewing for the day, make sure the needle is up.  Should the fabric get pulled away from the machine it won't tear or rip your project.

Hockey project update:  I'm spending time each day doing the embroidery and applique on my Hockey Garden quilt. I still need a good suggestion for a title!  Any ideas?

Ann Fahl  

Friday, March 22, 2013

The Hockey Applique Begins part 5

Well, I'm not sure if the thread work will be fun or not; it was really fun to design.  I think I may have created a monster with never ending applique and embroidery, in just about every color thread in the rainbow.  So where does one begin, when there are thousands of little pieces to be stitched?

Pick something easy to begin, it is important to get started. In the early stages of a project, sometimes the job appears to be overwhelming--like this one. After I have dealt with the initial hesitation, then I basically work from what appears to be on the bottom layer and work up to the top. This is because the ends of my starts and stops will be covered by another line of stitching on a segment that appears to be on top of it, and this secures any loose threads that need to be controlled. This bottom to top guideline, is the general rule, but of course I break it all the time! If I have blue thread in the machine, I'm not going to hop over and applique a red flower; I'm going to find something else blue to sew before I change my thread color again.
This is the back corner of the hockey bag. I've chosen to use a decorative stitch in variegated blue thread.

So I'm going to applique the hockey bag first with a beautiful blue variegated thread using some of the programmed stitches that my machine offers. The hockey bag is my starting point because it is underneath all the other objects in the picture.  I have chosen my favorite programmed stitch, and I use shiny thread with crisp tear-away stabilizer underneath. [This process will be covered in depth in my new booklet, Applique Ann's Way.]
Here is a sneak peek at the cover of my new booklet! Available in April.

Next I'll embroider the hockey sticks, covering them with thread.  This will be faster than appliqueing them and it will give them a wood grain look. Embroidery is done with a hoop, no stabilizer, and I move the hoop from side to side to completely cover the object. For detailed info see my book Coloring with Thread. 
A closeup of the embroidery with variegated beige thread, that gives a wood grain effect on the hockey stick.
 Now I realize the finely cut dandelions are curling up and starting to fray, so I'll embroider them next or they may just disappear. 
Dandelion detail in the lower left corner.  These too are embroidered.
So the applique and embroidery has just begun.  This is going to take me some time at the machine. Eventually this blog thread will be continued.  I have hours of decorative stitching ahead of me.

Ann Fahl

Friday, December 7, 2012

Fresh Salsa's Finale with Summary

The Border

We're at the end of the project. It's time to quilt the border. Again I have returned to that plan I drew up before all the quilting began. 
Ann's quilting plan for Fresh Salsa
 I doodled lots of things on the page but here's what I did for the border it is done in two parts.
Part one of the border.
I marked a curvy line in the border, dividing it roughly in half; with a silver pencil.  I danced (quilted) this area with leaves, spirals hearts and spirals. Then I went around the outside with some curvy lines that intersect the outside edge. This will make a nice flat edge when I block the piece and trim the edges.
Finished border.
The Binding

I found 4 different fabrics that might work for the binding.  It's always exciting to get to this point, because I know the quilt is almost done.  Put some careful thought into your fabric choice, because this is like a frame on a painting. Think of it as the sparkle on the edge. When you look at your top, do you want a contrasting edge or a subtle edge?  For me, it depends on the quilt and my mood at the time.  For more info on bias binding, may I recommend my booklet on binding.  You may think differently about it after reading the 28 pages that I've written. 
Here are the fabrics I though might work for the binding.
So which fabric won?  I thought it would be the green check on the left! The red/pink/yellow multi was too busy.The green/blue/red stripe was a decorator chintz looked great. I went out and purchased the small stripe on the right.  It had a sense of humor and pulled out all the colors in the top, but when placed on the quilt itself it was more pastel than I wanted.  So the winner is........the green decorator chintz.
Fresh Salsa, ©2012, finished and bound, 50 x 50 inches

Review:  hints for successfully quilting a pieced quilt top
  • Always make a sample of machine stitching every time you have re-threaded the machine or changed something.
  • Use the correct needle.  I prefer a topstitch needle.
  • Find the darning foot that works best for you. You need good visibility and it must ride high enough to clear the thick areas where the seams meet.
  • Reduce pressure adjustment on the pressure foot, check owner's manual for it's location.  I reduce the pressure to 0 on my machine.
  • Darning feet do wear out.  If it squeaks you might lubricate the foot with a dot of sewers aid. With a small brush, remove excess lint which may be clogging the spring. If you've used the foot for a long time, it may be time to get a new one.
  • Adjust the darning foot so it rides higher by using the wheel on the attachment, by bending the thin bar on top, or using Diane's method of adding an "0" ring to raise it up.
  • Wear quilter's gloves to give good control of the quilt under the darning foot. 
  • A SewSlip creates a smooth slippery surface for easy movement of the quilt on the bed of the machine. If you haven't tried one, they are worth the price.

Happy piecing and quilting
 Ann Fahl 





Friday, November 30, 2012

Quilting Fresh Salsa! part 1

Let the quilting begin.....................................................

Here is my sample flaming spiral.  I don't make pretty samples this is really how I work. Did you want glamour?
Let me tell you this quilt has been a challenge from beginning to end. Beginning in the center, I have planned on quilting a flaming spiral with red thread in the center.  Just to make sure, I practice on a sample first.

The actual flaming spiral in the center of the quilt. I like how the thread subtly blends with all the fabrics
The plan is to work from the center out.  I have taped my paper plan to my sewing table so I can refer to it as I move out to the next row.  This feels very much like following a cross stitch diagram or knitting pattern. So I continue to make small samples, change thread color where needed and keep moving outward.
Here is one of the first yellow arrow segments just outside of red center.
Quilting the yellow arrow segments began with a challenge. I wanted to try quilting it with the red thread, and after sewing one leaf, I realized the error of my plan.  The yellow variegated thread really worked the best.  Notice how it subtly emphasizes the leaves in the quilting pattern. I did the same thing in all four arrow segments.
Detail of dark variegated thread on the green triangles.
I worked around the next ring around the quilt, using yellow and red threads.  Then I got a chance to use the dark variegated thread on the green segment. I was very pleased with how it looked. It took quite some time to quilt my way out to the outer edges of the quilt.  I took my time, stopping for the day when I got tired.

I have found that when I quilt for extended periods of time I start to make mistakes and bad choices.  Since there is no deadline on this quilt, I can just take my time. This is a very relaxing way to quilt.

Along the way, I found that the darning foot was catching on the spots were all the seams come together. Since I have reached my limit of blog space, please see part 2.  Continue to scroll down.
Ann Fahl


Quilting Fresh Salsa part 2


Darning feet for Janome, the center metal foot is adjustable.
One of the monumental challenges I faced is what happens when the machine gets to an area where many seams cross. The foot would get caught on the "lump" and not move.  Then when I tried to force it I'd get a few huge stitches, which didn't look very good.

My goal is to create as even a stitch as possible. It stumped me for a little bit, and I realized why many quilters send their tops out to be quilted! Then I remembered that I could adjust my darning foot. (See image above, the center metal foot.)  All I had to do was spin the little wheel above the needle bar until the foot was high enough to just skim over the lumps.  It took awhile, but I found the correct level. For a complete blog on darning feet check out my earlier blog. For Bernina owners, Diane Gaudynski has a method to alter their darning feet check out her blog to read about this.


Altering the darning foot. If you have the above, clear style darning foot, many people find that it drags above the throat plate, even if the pressure on the foot has been reduced to zero.  This isn't a manufactured recommended procedure but it works:
  • Remove the foot from the machine and slightly bend the little bar down (area shown below the arrow).
  • To do this, turn the foot upside down, and firmly press the bar onto the edge of a table or something substantial to do the bending. Bend it just a little.  You will feel it "give."
  • Do be careful, as you can damage the surface of the table when doing this. Your are responsible, not me.
  • Re-attach the foot on the machine, if it is still dragging, remove and bend it a little bit more.
So much for darning feet, let's get back to the quilting.  I completed the center quilting by continually consulting my plan as shown in blog "Machine Quilting Fresh Salsa." This wasn't the fastest quilting job I've ever done, but I followed the map and finally reached  my destination.

Now it's time to quilt the border. How in the world am I going to quilt it?

Ann Fahl

Saturday, October 27, 2012

Garden of the Sun God--The End

The last challenge is to find the right fabric for the binding. At first I thought perhaps it would work best to piece a variety of red fabrics together. But then I realized there was a lot of stuff going on in the border already, perhaps one or two fabrics cut on the bias would be a better solution.

It's wonderful when I go digging in my stash and can find a number of possible fabrics for the binding. I chose a red batik with lights, mediums and darks marbled through it.  Perfect. Always cut binding on the bias, the corners will turn flatter, and the long sides will lay flatter. For a thorough discussion on binding your quilt see my booklet on bias binding.


Announcing the completed quilt, Garden of the Sun God, by Ann Fahl, this quilt is now included in my Ancient Artisans gallery on my website.

The completed quilt, Garden of the Sun God, 52.5 x 63 by Ann Fahl © 2012
Ann

Friday, October 26, 2012

The Quilting: Garden of the Sun God

By now, you may all hope I am done talking about this quilt. To an artist, the piece they have just finished is always the best work they have ever done.  In time, this may change, as it's success or lack of changes my opinion of the work! But for now, it is one of my best.

Detail of quilting at the base of papyrus
Now the quilting has begun. This is the most exciting for me, because all the time and effort I have put into the fabric selection and embroidery pays off. First, I detail all the pieces using monofilament thread in the top and bobbin. Don't cringe.  I have been doing this since the 1980's and it has been successful for me. When monofilament thread is used in the correct way, it will be your best friend. Outlining and stitching in the ditch are two of the best uses no one will ever see it!


Quilting detail of the pond
Next I pull out all my decorative threads and quilt all the empty or negative spaces.  This is what I'm doing when I feel that I am dancing on the quilt. The texture in the quilting brings the subjects to life. This has become an intuitive process for me, because I have been a machine quilter since 1988. This is why I wrote a book on machine quilting--my variety of course.  It is spontaneous, unstructured and informal.  There is too much stippling and feather making on quilts today, and that doesn't work for me. So I wrote Dancing with Thread so others might feel free to experiment with my ideas and techniques.


Quilting detail on the fish and border
I love quilting little scales on fish.  Using a pastel variegated thread, I detail the face and fins first, then use a little clamshell stitch to create the scales.  Without doing lots of detailed fusing, I just use a hand painted fabric, quilt it up, and it becomes a rather life like fish.

Once the quilting on the interior of the quilt is complete, I work on the outer border. After some looking in my notebook of quilting ideas, and looking at earlier quilts I decided to use half a coneflower on the inside edge. They are evenly spaced out along the seam. I used a silver or a white pencil to mark the outlines of each one. The flower has a spiral in the center, and there is random stitching filling the rest of the border. A bright red variegated thread #832 Rainbow, worked beautifully on the various reds in the pieced border.

Allow me to express an opinion here. One of the sad things I am finding in the quilt world is that more and more people are handing over their quilt tops to someone else to quilt.  By doing this, the quilt is no longer the work of one artist! And.....they are missing the most satisfying part of the quilt making process.  LEARN TO QUILT SO YOU CAN COMPLETE YOUR OWN QUILTS.  It's more fun!

Ann Fahl


Friday, October 19, 2012

Embroidery on The Sun God's Garden

After spending so much time and thought on the composition of a quilt, it's fun to actually begin the machine work. For me, the embroidery is what adds rich texture, and holds all the pieces in position.  I do this in a hoop so I don't need any stabilizer underneath the pieces.  This creates a softer quilt top and allows the quilting (over wool batting) to add more dimension to the finished product. For more information on how Ann handles her embroidery refer to her book, Coloring with Thread.

Detail of Scraps of a Different Color showing rejected embroidery pattern
Being a coneflower fan, I wanted to begin with them.  I had already decided how I wanted to embroider my angular flowers. First I had experimented on another quilt where I discovered that I didn't like my first idea. This is why it is so important to test out ideas first, so problems can be avoided on major pieces of work. So I had to rethink my ideas and this is what I came up with.
Embroidery and quilting detail of coneflowers with honey bee
Each petal was detailed in the opposite direction with a variegated pink thread. This was a simple plan which I could easily accomplish, yet different than anything I had done before.

The papyrus was another challenge.  How will I embroider them?  I chose to use metallic blue and green thread to detail the heads, and gold thread for the sepals. This was lots of fun and a challenge to work with metallics.  I had finished writing my Mastering Metallics booklet by this time, so I tested out some of my suggestions! The detail on the curved edge is really pleasing and adds richness of texture.  I also love the little circles that hold the seeds in the papyrus head.
Harry becomes the focal point using Superior Thread's Midnight Rainbow #844
 And then there is Harry. I knew all the embroidery on the bird was going to make him come to life. I didn't worry too much about individual feathers, I just wanted texture.  Midnight Rainbow add the color I wanted over the double dyed blue/purple fabric. Notice that the grass behind the bird adds more depth to the quilt.

Now that the embroidery is complete, all that remains is the quilting.

Wednesday, May 2, 2012

Meet Ann in Rochester MN

Hi everyone.  I am back from a teaching week in Paducah.  The weather was warm and summery, so different than here in WI. 

You will get my Paducah report in a few days, but right now, the fine people in Rochester, MN wanted me to tell you that there are still openings in two of my classes at MN Quilters 34th Annual Show and Conference:

Beaded Landscape class project

June 14, full day class titled Beaded Landscapes.  This is an easy handwork class that doesn't require much equipment.
Dancing Coneflowers detail 
 June 15-16, two day class, Dancing on Your Quilt.  If you are interested in a thorough class on free-motion quilting, this is it! A machine is required, the second day you will need a small wall hanging to quilt. There is still time to prepare for this workshop.

Here is a link to all the classes at this four day event and quilt show.

Thursday, April 12, 2012

Quilts in France!

Right now, as I am contemplating my age, career and life's goals; an opportunity to exhibit my work in France came along. It is such an honor to be one of the artists exhibiting.  Eight of my quilts will be included in:
ParcExpo
9400 Villefranche sur Saone
near Lyon - France
April 12-15, 2012
Wow That's Orange (c) Ann Fahl
There will be quilts from Europe, but there will be special exhibitions from Japan, Australia and USA.  I will be included in the American portion. Of course I had to send my two brilliant orange quilts for them, they are such attention grabbers.  And by the way, UPS sent my quilts from Racine to France, and it only took two days.
Orange Coneflowers (c) Ann Fahl
So if you will not be attending this Quilt Expo, you can at least see my 8 quilts, right here, in the comfort of your very own home.  The rest of my quilts included are:
If I could speak French, I would put all this in a different language, for you to peruse. But I can't, so you will have to read this in English!  So, go get yourself a beautiful stemmed crystal glass, and put some French red wine in it, get comfy in your chair and visit all of my quilts online. 

My thanks to Margo Bimler and Monique Bonnet Imbaud for arranging this exhibit!

Ann Fahl